LF PowerRadSok Bolt vertical
MEPT - 16X16 - D8.00/26.4 - P25/2.20/3.00 v - RM3.40
Item number
LF999108
Ampacity per pin (20°C) ~
10.00 A
Ampacity per pin (85°C) ~
6.00 A
Ampacity component (20°C) ~
250.00 A
Ampacity component (85°C) ~
150.00 A
Material
Brass lead-free (max. 0.1% Pb)
Surface
nickel
Number of pins
25
Customs tariff code / HS-Code
85369095
Country of origin
Deutschland
Total height
34.40 mm
Height above circuitboard
31.40 mm
Thread diameter
8.00 mm
Pedestal length
16.00 mm
Pedestal width
16.00 mm
Pin length
3.00 mm
Pin diagonal
2.20 mm
Pin assembly
Full plain
Grid dimension X
3.40 mm
Grid dimension Y
3.40 mm
Assembly method PCB
Pressfit Techn
Press-in force min.
2160 N
Press-in force max.
9000 N
Press-in speed min.
100 mm/min.
Press-in speed max.
250 mm/min.
Drilling diameter
2.20 mm
Final diameter HAL Surface
2.05 mm
Final diameter Chemical Surface
2.08 mm
LF PowerRadSok Bolt vertical
Further product variants
Processing PowerRadsok Press-fit
PowerRadSok Press-fit Powerelements from Würth Elektronik ICS are pressed into the printed circuit board. Soldering is not required and there is no thermal stress. The manufacturing step fits easily into the process chain and is extremely cost effective.
Processing instructions
- Use only suitable press-fit tools for press-fitting
- For Powerelements with protruding lamella, the upper die must be recessed around the lamella. Do not apply pressure to the lamella.
- A gap of 0.1 to 0.5 mm is recommended between the PCB and the pin base
Further information
PCBs shall be designed in accordance with the latest edition of IPC A 600. In the case of massive press-fit technology, the PCBs must be designed in accordance with the Würth Elektronik ICS Press-fit Specification. Special attention should be paid to drill diameters and copper thickness.